mcfm_version = 10.3
[extra]
nohistograms = T
[general]
# process number
nproc = 487
# part: lo, nlo, nnlo, nlocoeff, nnlocoeff
part = nlo
# string to identify run
runstring = test487
sqrts = 13000
# ih1, ih2: +1 for proton, -1 for antiproton
ih1 = +1
ih2 = +1
zerowidth = .true.
removebr = .false.
# electroweak corrections: none, sudakov or exact
ewcorr = none
[nnlo]
# optional: tau cutoff for NNLO processes, otherwise default value is chosen
# for less than 1% cutoff effects in the total cross section.
# taucut = 0.001
# optional array of numerical taucut values that should be sampled on the fly in addition.
# these values can be smaller or larger than the nominal taucut value
# tcutarray = 0.001 0.002 0.003 0.004 0.005 0.01 0.02 0.03 0.05 0.1 0.2 0.4 0.8 1.0
[resummation]
usegrid = .true.
makegrid = .false.
# path to write grid files with trailing slash
gridoutpath = PDFs/
# path to read grid files with trailing slash
gridinpath = PDFs/
# integration range of purely resummed part
res_range = 0.0 80.0
# integration part of fixed-order expansion of resummed part
resexp_range = 1.0 80.0
# lower qT cutoff for fixed-order result
# typically this should agree with the lower resexp_range value
fo_cutoff = 1.0
# parameter to be used in plotting routines for transition function
transitionswitch = 0.4
[pdf]
# PDF label for internal routines
pdlabel = 'CT14.NN'
[lhapdf]
# LHAPDF PDF label, multiple sets separated by spaces possible
lhapdfset = LUXqed17_plus_PDF4LHC15_nnlo_30
# LHAPDF PDF member number, specify for each set, separated by spaces
lhapdfmember = 0
# calculate PDF uncertainties.
# note: can only do PDF uncertainties or scale variation at the same time.
dopdferrors = .false.
[scales]
# Renormalization scale
renscale = 100
# Factorization scale
facscale = 100
# Controls use of dynamical scale
# when different from 'none', set renscale and facscale to 1
dynamicscale = none
# perform scale variation
doscalevar = .false.
# can be 2 or 6 for 2-point or 6-point scale-variation
maxscalevar = 6
[masses]
# Higgs mass
hmass = 125
# Top-quark mass
mt = 173.3
# Bottom-quark mass
mb = 4.66
# Charm-quark mass
mc = 1.275
[basicjets]
# Jet-inclusive cross section
inclusive = .true.
# Jet-clustering algorithm: ankt, ktal, cone, hqrk, none
algorithm = ankt
# minimum jet pT; can also have ptjetmax
ptjetmin = 30
# maximum jet rapidity; can also have etajetmin
etajetmax = 2.4
Rcutjet = 0.5
[masscuts]
# minimum mass of 3-4 system
m34min = 0
# optional, maximum mass of 3-4 system, otherwise sqrts
# m34max = 14000
# minimum mass of 5-6 system
m56min = 0
# optional, maximum mass of 5-6 system, otherwise sqrts
# m56max = 14000
# minimum mass of 3-4-5-6 system
m3456min = 0
# optional, maximum mass of 3-4-5-6 system, otherwise sqrts
# m3456max = 14000
[cuts]
# make additional cuts in this section
makecuts = .false.
# minimum lepton pT; can also have ptleptmax
ptleptmin = 20
# maximum lepton rapidity, absolute value; can also have etaleptmin
etaleptmax = 2.4
# rapidity veto on leptons
etaleptveto = 0.0 0.0
# minimum missing pT
ptminmiss = 30.0
# minimum pT for additional leptons; can also have ptlept2max
ptlept2min = 20.0
# maximum rapidity for additional leptons, absolute value; can also have etalept2min
etalept2max = 2.4
# rapidity veto on additional leptons
etalept2veto = 0.0 0.0
# minimum (3,4) transverse mass
m34transmin = 0.0
# minimum R(jet,lept)
Rjlmin = 0.0
# minimum R(lept,lept)
Rllmin = 0.0
# minimum rapidity separation between jets
delyjjmin = 0.0
# enforce jets to be in opposite hemispheres
jetsopphem = .false.
lbjscheme = 0
# b-jet minimum pT; can also have ptbjetmax
ptbjetmin = 0.0
# b-jet maximum rapidity; can also have etabjetmin
etabjetmax = 99.0
[photon]
# include fragmentation
fragmentation = .false.
# fragmentation set
fragmentation_set = GdRG__LO
# fragmentation scale
fragmentation_scale = 1.0
# minimum photon pT; can also have gammptmax
gammptmin = 40
# maximum photon rapidity; can also have gammrapmin
gammrapmax = 2.5
# second photon minimum pT
gammpt2 = 25
# third photon minimum pT
gammpt3 = 25
# minimum R(photon,lepton)
Rgalmin = 0.4
# minimum R(photon,photon)
Rgagamin = 0.4
# minimum R(photon,jet)
Rgajetmin = 0
# cone size for isolation
cone_ang = 0.4
# energy fraction for isolation
epsilon_h = 0.5
# exponent for smooth-cone isolation
n_pow = 1
[histogram]
# write top-drawer histograms
writetop = .false.
# write raw table file for each histogram
writetxt = .true.
[integration]
# use sobol low discrepancy sequence
# usesobol = .true.
# random number seed, when not using sobol, 0 means random
seed = 0
# relative precision goal
precisiongoal = 0.05
# resume from previous integration snapshot
readin = .false.
# write histograms and results after each vegas iteration
writeintermediate = .true.
# warmup precision goal in percent (default: 25%)
# unless this precision is reached, the number of calls will be
# increased and the warmup runs again
warmupprecisiongoal = 0.25
# warmup chisq goal (default: 2.5)
# unless this value of chisq/it is reached, the number of calls will be
# increased and the warmup runs again
warmupchisqgoal = 2.5
# process specific initializations
# Single top SMEFT, nproc=164, 169
[singletop]
# C_phiq (O1), real-valued
c_phiq = 0
# C_phiphi (O2), real and imaginary part
c_phiphi = 0.0 0.0
# C_tW (O3), real and imaginary part
c_tw = 0.0 0.0
# C_bW (O4), real and imaginary part
c_bw = 0.0 0.0
# C_tG (O6), real and imaginary part
c_tg = 0.0 0.0
# C_bG (O7), real and imaginary part
c_bg = 0.0 0.0
# Lambda, scale of EFT breakdown in GeV
lambda = 1000
# enable 1/Lambda^4 contributions
enable_lambda4 = .false.
# disable Standard Model contributions
disable_sm = .false.
# anomalous couplings mode (only LO)
mode_anomcoup = .false.
# Anomalous couplings of the W and Z
[anom_wz]
# enable anomalous W/Z couplings
enable = .false.
# Delta g1(Z)
delg1_z = 0
# Delta K(Z)
delk_z = 0
# Delta K(gamma)
delk_g = 0
# Lambda(Z)
lambda_z = 0
# Lambda(gamma)
lambda_g = 0
# h1(Z)
h1Z = 0
# h1(gamma)
h1gam = 0
# h2(Z)
h2Z = 0
# h2(gamma)
h2gam = 0
# h3(Z)
h3Z = 0
# h3(gamma)
h3gam = 0
# h4(Z)
h4Z = 0
# h4(gamma)
h4gam = 0
# Form-factor scale, in TeV
tevscale = 2.0
# Higgs+jet with mass corrections, process 200
[hjetmass]
mtex = 0
[anom_higgs]
# Gamma_H / Gamma_H(SM)
hwidth_ratio = 1.0
cttH = 1.0
cWWH = 1.0